Hợp kim nhôm 7050

Mục lục

Overview of Aluminium Alloy 7050 Powder

Aluminium 7050 is a high-strength aluminium alloy commonly used in aerospace applications. Key details about 7050 aluminium alloy powder:

  • Contains zinc, magnesium, copper as primary alloying elements.
  • Exhibits excellent strength-to-weight ratio and corrosion resistance.
  • Used for critical structural parts, landing gear, fuselage components in aerospace.
  • Available in powder form for additive manufacturing processes like selective laser melting (SLM) and electron beam melting (EBM).
  • Powder production methods include gas atomization, plasma atomization, and cryomilling.
  • Powder characteristics like particle size distribution and morphology optimized for AM.

Typical Applications of 7050 Aluminium Parts

CategoryCác ứng dụng
Không gian vũ trụStructural airframe components, landing gear, rockets
Ô tôWheels, control arms, drivetrain parts
Công nghiệpRobotics, tooling jigs and fixtures, instrumentation
Hàng hảiPropellers, drive shafts, pumps, valves

The lightweight strength of 7050 makes it suitable for high-performance structural parts across industries.

Aluminium 7050 Powder Specifications

Tham sốGiá trị điển hìnhVai trò
Kích thước hạt20-63 mAffects packing density and flow
Hình tháiHình cầuImproves powder flow in AM machines
Thành phần hợp kimZn – 6%, Mg – 2%, Cu – 2.3%Determines properties
Mật độ rõ ràng1.7-2.0 g/ccImpacts final part density
Tốc độ lưu lượng hội trường& lt; 30 s/50gFast flow ensures uniform layers
Độ ẩm& lt; 0,1%Minimizes powder oxidation

Maintaining consistent powder characteristics is crucial for high quality AM processing.

Equipment for Aluminium Powder Production and Handling

Thiết bịSự miêu tả
AtomizersConvert molten alloy into fine powder using gas or plasma energy
MillsMechanical milling reduces powder particle size and morphology
SievesClassify powder into narrow size ranges suitable for AM
MixersHomogenize blended powders evenly
HoppersStore and supply powder to printers
RecyclersRemove contamination from reused powder and improve flow

Specialized powder handling equipment required to prevent oxidation and contamination.

Suppliers of 7050 Aluminium Powder

Nhà cung cấpDetailsGiá cả
Supplier 1Wide range of aluminium alloys.$80-100/kg
Supplier 2Custom alloy development.$100-150/kg
Supplier 3High purity medical/aerospace grades.$150-300/kg

Price depends on purity, distribution, lot size, quality, and other parameters. Small R&D batches typically more expensive.

Hợp kim nhôm 7050

How to Choose a 7050 Aluminium Powder Supplier

Key factors when selecting a 7050 aluminium powder supplier:

  • Experience – Look for an established supplier with extensive technical experience with aluminium alloy powders. This results in higher quality and consistency.
  • Production capability – Supplier should be able to produce consistent batches meeting specified size distribution, morphology, purity etc.
  • Quality systems – ISO 9001 or AS9100 certification indicates reliable quality control and assurance.
  • Chuyên môn kỹ thuật – Powder production requires significant metallurgy and materials science knowledge. Ensure suppliers have this.
  • Testing capabilities – Supplier should fully test all powder lots and provide detailed certification data.
  • Responsiveness – They should respond quickly to inquiries, requests for quotes, samples, etc.
  • Customer support – Choose a supplier who provides good technical advice and application support.

Select a supplier familiar with needs of the AM industry and your specific application requirements.

How to Optimize 7050 Powder for AM Processing

Follow these guidelines when preparing 7050 aluminium powder for additive manufacturing:

  • Start with high purity gas-atomized powder with controlled particle size distribution (e.g. 20-45 μm).
  • Use spherical powder morphology for optimal packing density and spreading. Avoid satellite particles.
  • Store powder properly in sealed, inert environments to prevent oxidation. Desiccant drying may be needed.
  • Consistently characterize new powder lots – composition, size distribution, morphology, flow rate, oxide content.
  • Blend in any alloying elements homogeneously to prevent composition gradients in printed parts.
  • For SLM, use minimum layer thicknesses equal to 8-12x the powder particle size.
  • Adjust laser power to achieve full melting and density without excessive evaporation.
  • Minimize contact between powder and oxygen/moisture during printing to reduce oxidation.
  • Consider classifying and sieving recycled powder to refresh size distribution and flowability.

Work jointly with your powder and AM machine suppliers to identify ideal powder characteristics and printing parameters.

Design Principles for AM Parts in Aluminium 7050

When designing aluminium 7050 parts for additive manufacturing, consider these guidelines:

  • Use minimum wall thicknesses of 1-2 mm to ensure sufficient strength. Thinner walls risk cracking.
  • Design with angular transitions instead of sharp corners to reduce stress concentrators.
  • Avoid overhangs exceeding 45° to eliminate the need for extra supports.
  • Position the part orientation to minimize support requirements and avoid collisions with the recoater blade.
  • Account for 20-50% lower strength horizontally vs vertically due to anisotropy from layer-based construction.
  • Allow for post-machining removal of 0.3-0.5 mm of stock material to improve surface finish.
  • Consolidate sub-assemblies into a single printed part where possible to reduce weight and minimize fasteners.
  • Include vent holes in enclosed volumes to prevent pressure buildup during processing.

Validate designs using finite element analysis simulation and actual AM build trials.

Post-Processing Aluminium 7050 AM Parts

Common post-processing techniques used for as-printed aluminium 7050 components include:

  • Support removal via hands tools or dissolution in caustic solutions.
  • Stress relieving heat treatment at 300°C for 2 hours. Prevents cracking.
  • Machining – CNC milling and turning to improve dimensional precision and surface finish. Use rigid setups and sharp tools.
  • Abrasive blasting or grinding reduces surface roughness. Must control media to prevent embedment.
  • Vibratory finishing smoothes surfaces and removes adhered particles.
  • Anodizing increases hardness and corrosion resistance.
  • Metal plating improves wear resistance or conductivity.
  • Joining processes like screwing or riveting to assemble components. Adhesives also possible.

Use qualified operators familiar with aluminium alloys during all post-processing steps.

Integrating Printed 7050 Parts into Assemblies

To successfully integrate 3D printed aluminium 7050 parts into end-use assemblies and products:

  • Thoroughly clean surfaces of any residual powder, oxidation layers, or other contaminants. Use chemical or thermal deburring if needed.
  • Apply protective coatings as needed – anodizing, painting, powder coating all suitable. Improves durability.
  • Account for lower ductility compared to cast or wrought aluminium when designing interfaces and joints.
  • Allow for thermal expansion differences when mating AM components to parts of other materials.
  • Select optimal joining techniques – adhesives, fasteners, brazing, and welding can all be used depending on loads.
  • Heat treatment during integration may be needed – for example, stress relieving AlSi10Mg support structures.
  • Validate assembly functionality under expected use conditions through prototyping and testing.

Work collaboratively with manufacturing engineers throughout the integration process to ensure performance requirements are met.

Operating and Maintaining Printed Aluminium 7050 Parts

To achieve the best performance from additively manufactured aluminium 7050 components when in service:

  • Operate within recommended high temperature limits based on the alloy specifications. Prolonged exposure over 120°C accelerates precipitation hardening.
  • Avoid excessive loads that result in yielding, deformation, or fatigue failure. AM parts have lower ductility.
  • Use protective anodized or painted coatings in corrosive environments. 7050 is susceptible to corrosion without protection.
  • Periodically inspect critical dimensions and parameters to check for wear, cracks, or distortions indicating an issue.
  • Disassemble mechanisms and apply fresh grease/oil if required – prevent seizing over time.
  • Replace any components approaching their expected service life as a preventive measure.
  • Monitor manually or via nondestructive testing for developing flaws like cracks during routine maintenance intervals.

Develop detailed part maintenance plans and schedules in conjunction with design and test engineers to ensure in-service performance.

Pros and Cons of Aluminium 7050 AM vs Traditional Methods

Advantages of additive manufacturing with aluminium 7050 powder:

  • Complex geometries and lightweight lattices can be fabricated.
  • No required tooling investment for small to medium production volumes.
  • Rapid prototyping of new designs and custom parts on demand.
  • Reduced waste – use only required amount of material.
  • Ability to consolidate sub-assemblies into single printed parts.
  • Shorter development timelines versus traditional manufacturing methods.

Limitations to consider:

  • Higher per-part cost for small production volumes, although AM scale effects can be favorable.
  • Limitations on maximum part size based on printer build volume.
  • Additional post-processing often needed to achieve final material properties and tolerances.
  • Anisotropic properties due to layer-by-layer printing.
  • Supply chain restrictions for aerospace-grade powder material.
  • Lower ductility and fatigue life than wrought 7050 aluminium.

Evaluate the pros/cons relative to production volumes, cost targets, quality needs and specific application requirements.

Hợp kim nhôm 7050

Câu hỏi thường gặp

Q: What particle size range is recommended for 7050 aluminium AM powder?

A: Typically 20-45 microns, with a tightly controlled distribution. Too fine causes handling issues while too large negatively affects density.

Q: What applications are 7050 aluminium AM parts used for?

A: Primarily structural components in aerospace, automotive, and high-performance machinery where high strength-to-weight ratios are critical.

Q: Does aluminium 7050 powder require special storage precautions?

A: Yes, 7050 powder is highly susceptible to oxidation. It must be stored in vacuum sealed bags with desiccant packs and minimal air exposure.

Q: What post-processing methods are commonly used on 7050 AM parts?

A: Support removal, stress relieving, machining, blasting, anodizing, and plating. Apply any steps needed for integration like fastening.

Q: Is heat treatment needed for 7050 AM parts?

A: Yes, 7050 is typically stress relieved at 300°C for 2 hours after printing to prevent cracking due to internal stresses.

Q: What density can be achieved with optimally processed 7050 aluminium AM parts?

A: Density above 99% is achievable with careful control of powder quality and dialing in ideal SLM/EBM parameters.

Q: Can you weld aluminium 7050 AM components?

A: Yes, friction stir welding is recommended for aluminium AM parts if needed. Conventional fusion welding alters local material properties.

Q: What safety precautions are required when handling aluminium powders?

A: Use protective equipment to prevent inhalation or skin contact. Control dust levels to avoid combustion hazard since aluminium is flammable.

biết thêm quy trình in 3D

Chia sẻ

logo 3dp kim loại nhỏ

Metal3DP Technology Co., Ltd là nhà cung cấp hàng đầu các giải pháp sản xuất phụ gia có trụ sở tại Qingdao, Trung Quốc. Công ty chúng tôi chuyên về thiết bị in 3D và bột kim loại hiệu suất cao cho các ứng dụng công nghiệp.

Yêu cầu để có được giá tốt nhất và giải pháp tùy chỉnh cho doanh nghiệp của bạn!

Những bài viết liên quan

Về met3dp

Chơi Video

Cập nhật gần đây

Sản phẩm của chúng tôi


Bất kỳ câu hỏi? Gửi tin nhắn cho chúng tôi ngay! Chúng tôi sẽ phục vụ yêu cầu của bạn với cả một nhóm sau khi nhận được tin nhắn của bạn. 

Nhận Metal3DP's
Tài liệu sản phẩm

Nhận các tin tức mới nhất, đổi mới và tin tức của công ty.