Tổng quan
Thép không gỉ Bột 17-4ph là một loại kết tủa thép không gỉ martensitic làm cứng có thể được sử dụng để in 3D kim loại. Nó có sức mạnh và độ cứng cao kết hợp với khả năng chống ăn mòn tốt. 17-4ph chứa khoảng 4% đồng cho phép làm cứng tuổi hợp kim thông qua kết tủa các hạt giàu đồng.
This article provides an overview of 17-4PH powder including its composition, properties, processing, applications, suppliers, and comparisons to other alloys. Key details are summarized in the tables below.
17-4PH Powder Composition
17-4PH gets its name from its composition which includes approximately 4% copper. The main alloying elements are:
| Yếu tố | Cân nặng % |
|---|---|
| Crom | 15 – 17.5% |
| Niken | 3 – 5% |
| Đồng | 3 – 5% |
| Mangan | 1% |
| Silicon | 1% |
| Carbon | ≤ 0.07% |
| Sulfur & Phosphorus | ≤ 0.04% |
| Nitơ | 0,03% |
The copper content results in precipitation hardening which increases the strength and hardness of 17-4PH substantially. The chromium provides corrosion resistance. Nickel also boosts corrosion resistance while enhancing ductility and toughness.
17-4PH Powder Properties
17-4PH powder offers an excellent combination of high strength and good corrosion resistance. Key properties include:
| Tài sản | Sự miêu tả |
|---|---|
| Sức mạnh | Tensile strength up to 1,380 MPa, yield strength up to 1,240 MPa |
| Độ cứng | Up to 44 HRC after aging |
| Chống ăn mòn | Better than 400 series stainless steels due to copper |
| Khả năng gia công | More difficult to machine than 300 series due to higher strength |
| Magnetism | Slightly magnetic due to martensitic microstructure |
| Khả năng hàn | Lower weldability than 300 series due to precipitation hardening |
The strength, hardness, and corrosion resistance can be tailored through heat treatment. Solution annealing renders the alloy soft and ductile. Subsequent aging induces precipitation of copper-rich particles which impedes dislocation movement, thereby hardening and strengthening the material.
17-4PH Processing
17-4PH powder can be processed via several metal 3D printing methods:
- Laser Powder Bed Fusion (L-PBF)
- Electron Beam Powder Bed Fusion (E-PBF)
- Directed Energy Deposition (DED)
L-PBF is one of the most common approaches. Process parameters must be carefully controlled to achieve dense, crack-free parts and avoid residual stresses.
Typical processing conditions for 17-4PH powder in L-PBF:
- Độ dày lớp: 20-50 μm
- Laser power: 100-400 W
- Scan speed: 100-1500 mm/s
- Khoảng cách nở: 80-120 m
- Beam diameter: 50-100 μm
A stress relief heat treatment is recommended after printing to relieve residual stresses. The printed parts can be solution annealed and aged to increase hardness and strength.
17-4PH Applications
17-4PH is used for metal 3D printed parts requiring high strength, hardness, and moderate corrosion resistance across a variety of industries:
- Aerospace: Turbine blades, impellers, fasteners, brackets
- Automotive: Transmission components, turbocharger parts
- Oil & gas: Valves, wellhead parts, pumps
- General engineering: Tooling, fixtures, molds
The high hardness after aging makes 17-4PH suitable for wear-resistant applications. It can substitute for hard-to-machine materials like tool steels for injection molds and dies. The alloy is commonly used for high-strength structural brackets and housings.
17-4PH Powder Suppliers
17-4PH powder is commercially available from leading metal powder manufacturers:
| Nhà cung cấp | Lớp sản phẩm | Phạm vi kích thước |
|---|---|---|
| Sandvik | Osprey 17-4PH | 15-45 m |
| thợ mộc | 17-4f | 15-45 m |
| HOÀN TOÀN | 17-4 PH | 15-53 m |
| Công nghệ LPW | 17-4f | 15-45 m |
| Erasteel | 17-4 PH | 20-150 μm |
Prices range from $50/lb to $90/lb depending on quantity ordered. Custom particle size distributions and high purity grades (e.g. phosphate passivated) are available.
17-4PH vs Other Alloys
17-4PH compares to stainless steel and tool steel alloys as follows:
| Hợp kim | Sức mạnh | Chống ăn mòn | Comments |
|---|---|---|---|
| 17-4f | Rất cao | Vừa phải | Precipitation hardening; high hardness; good strength and corrosion resistance combination |
| 316 l | Trung bình | Xuất sắc | Standard corrosion resistant stainless; low strength; not heat treatable; cheaper |
| PH 13-8 | Cao | Xuất sắc | Precipitation hardening; high strength and corrosion resistance; contains 8% nickel |
| H13 Tool Steel | Rất cao | Vừa phải | Standard tool steel; high hardness but lower corrosion resistance; more expensive |
Câu hỏi thường gặp
What are the main advantages of 17-4PH stainless steel?
The main advantages of 17-4PH are its high strength and hardness coupled with moderate corrosion resistance. Hardness values up to 44 HRC are possible through aging. It offers substantially higher strength than 300 series stainless steels.
What is 17-4PH stainless steel used for?
Common applications of 17-4PH include structural components like brackets and housings, wear-resistant parts, plastic injection molds and dies, impellers, valves, and aerospace components. It is widely used across aerospace, oil & gas, automotive, and general engineering.
Why is 17-4PH suitable for metal 3D printing?
17-4PH has low thermal conductivity and coefficient of thermal expansion, making it less prone to residual stress and cracking during printing. Its high hardness enables printing of wear resistant tooling. The alloy is commonly available in powder form.
What heat treatment is used for 17-4PH?
17-4PH is typically solution annealed at 1038-1066°C then aged at 371-427°C to precipitate copper-rich particles. This causes the alloy to harden and strengthen substantially. Stress relieving prior to heat treatment is recommended.
How does 17-4PH compare to 316L and H13 tool steel?
17-4PH has much higher strength and hardness than 316L stainless steel but lower corrosion resistance. Compared to H13 tool steel, 17-4PH offers better corrosion resistance with slightly lower hardness. 17-4PH provides a good balance between hardness, strength, and corrosion resistance.
What precautions are needed when 3D printing 17-4PH?
Careful process parameter selection and stress relieving between layers is important to minimize residual stresses and cracking. Print orientation, support structures, and resolution/layer height must also be optimized for complex geometries.
What suppliers offer 17-4PH powder?
Leading suppliers of 17-4PH powder include Sandvik, Carpenter Additive, Praxair, LPW Technology, and Erasteel. Powder is available in different size distributions customized for AM processes like DED and L-PBF.
