Atomized Metals: Types,Characteristics,Specifications

Table of Contents

Overview

Atomized metals refer to metal powders produced through atomization, a process where molten metal is broken up into fine droplets and rapidly cooled to form a powder. The atomization process allows for precise control over the powder’s particle size, morphology, and microstructure.

Atomized metal powders are used in a wide range of applications including manufacturing, 3D printing, and surface coating. They provide benefits such as high purity, consistency, and ability to develop specialty alloys. The most commonly atomized metals include aluminum, copper, iron, nickel, and titanium.

This guide provides a detailed overview of atomized metal powders covering types, characteristics, applications, specifications, suppliers, installation, operation, maintenance, and more. It aims to help readers understand the technology and make informed choices when selecting atomized metal powders.

Types of Atomized Metals

There are two main types of atomized metal powders:

Air Atomized Metals

In air atomization, the molten metal stream is broken into droplets by high pressure air or an inert gas. Air atomized powders have a spherical morphology with a smooth surface. They are suitable for applications requiring good flowability.

Water Atomized Metals

In water atomization, the molten metal is disintegrated by high pressure water jets. Water atomized powders have an irregular shape with a rough surface texture. They provide higher compressibility preferred for pressing applications.

The table below summarizes the key differences between air and water atomized metal powders:

ParameterAir AtomizedWater Atomized
Particle ShapeSphericalIrregular, jagged
Surface TextureSmoothRough
FlowabilityExcellentModerate
Apparent Density2 – 3.5 g/cc3 – 4 g/cc
CompressibilityModerateHigh
Production RateLowerHigher
CostHigherLower
atomized metals

Characteristics of Atomized Metal Powders

The main characteristics defining the quality and performance of atomized metal powders include:

Particle Size – The particle size distribution determines packing density, flowability, and surface area. Tighter control over size leads to better product consistency.

Morphology – Particle shape impacts density, compaction, and sintering. Spherical particles offer better flow whereas irregular shapes provide higher green strength.

Purity – High purity is essential for critical applications. Impurities can be minimized through using raw materials with low contamination.

Oxygen Content – Lower oxygen content reduces powder reactivity and improves final material properties. Water atomized powders tend to have higher oxygen pickup.

Apparent Density – Higher density translates to better flow and handling efficiency. Typical values range from 25% to 60% of theoretical density.

Flowability – Good powder flow ensures reliability in automated processes for shaping, filling, and packaging. It depends on parameters like particle size, shape, and surface roughness.

Compressibility – Compressibility determines the pressed part’s green strength before sintering. Irregular particle shape improves interlocking and green strength.

Carefully controlling these powder characteristics through the atomization process is crucial for achieving repeatable high performance.

Applications of Atomized Metal Powders

Atomized metal powders are used in a wide array of industries and applications leveraging their unique benefits. Some major application areas include:

Metal Additive Manufacturing

Also known as metal 3D printing, this involves building metal components layer-by-layer from powder material. Fine spherical powders with controlled size distribution are preferred for smooth flow and packing during spreading. Common materials include titanium, aluminum, nickel alloys, and tool steels.

Powder Metallurgy

Atomized powders are compressed at high pressures into “green” parts and then sintered to produce finished components. Irregularly shaped powder particles offer better compressibility. Parts with complex geometries can be manufactured near net-shape, minimizing material waste.

Surface Coatings

Thermal spray techniques like plasma spraying deposit molten or semi-molten powders onto surfaces forming protective or functional coatings. Finer spherical powders improve coating density and bond strength. Wear and corrosion resistant coatings are commonly applied.

Metal Injection Molding (MIM)

This combines plastic injection molding with powder metallurgy to manufacture small, complex, net-shape metal parts. Smooth flowing powders with tailored particle size and binders are required for defect-free mold filling.

Brazing and Soldering

Atomized powder preforms enable metallurgical joining of intricate components. Smooth powders with controlled size ensure optimal preform fabrication. Brazing filler metals include aluminum, silver, and copper.

Friction Materials

Atomized metal powders serve as friction modifiers in brake pads and other applications. Copper, iron, and brass powder additions improve friction and wear resistance compared to non-asbestos organic formulations.

Specifications of Atomized Metal Powders

Atomized metal powders must meet exacting specifications tailored to the manufacturing process and end use requirements. Typical powder specifications are outlined below:

Particle Size Distribution

ParameterTypical Range
D1010 – 45 μm
D5020 – 75 μm
D9040 – 150 μm

D10, D50, D90 refer to the powder particle size below which 10%, 50%, and 90% of the sample lies respectively. Tighter distribution improves density and performance.

Morphology

  • Shape – Spherical, irregular
  • Surface Texture – Smooth, rough
  • Satellites – Less than 5% by weight

Purity

  • Oxygen – <1000 ppm
  • Nitrogen – <100 ppm
  • Carbon – <1000 ppm
  • Other Impurities – Element specific

Apparent Density

  • Powder Tap Density – Typically 40-60% of theoretical density
  • Poured Density – 25-40% of theoretical density

Meeting powder specifications is vital for repeatable processing and final product quality. Reputable suppliers provide comprehensive certificates of analysis.

Suppliers of Atomized Metal Powders

Many companies specialized in producing atomized metal powders catering to diverse applications. Some leading global suppliers include:

Atomising Systems Limited

  • HQ – Sheffield, UK
  • Materials – Al, Cu, Fe, Ni
  • Capacity – 4000 tons/year
  • Serving AM, thermal spray markets

Sandvik Osprey

  • HQ – Neath, UK
  • Materials – Ti, Al, steels, superalloys
  • Capacity – 14,000 tons/year
  • Large portfolio for AM industry

Höganäs AB

  • HQ – Höganäs, Sweden
  • Materials – Fe, Cu, Al alloys
  • Capacity – 300,000 tons/year
  • Focus on automotive industry

ATI Powder Metals

  • HQ – Pittsburgh, USA
  • Materials – Ti, Ni, Al, Fe alloys
  • Capacity – 15,000 tons/year
  • Leading supplier for additive manufacturing

Mitsubishi Materials

  • HQ – Tokyo, Japan
  • Materials – Cu, Ni, cemented carbides
  • Capacity – 8000 tons/year
  • Strong presence in Asian markets

Prices vary widely depending on material, purity, particle size, and purchase volume. Expect to pay $20-100 per kg for common metals and $100-500 per kg for specialty alloys.

atomized metals

Installation of Atomized Metal Powder Systems

Installing equipment for handling atomized metal powders requires attention to safety, cleanliness, and reliability. Here are some key considerations:

Containment

  • Use sealed containers for storage and transport
  • Minimize open handling through enclosed conveyors and transfers
  • Integrate glove boxes, RTP hoods for manual operations
  • Provide dust extraction with baghouse or cyclone filters

Explosion Prevention

  • Ensure electrical equipment is properly grounded and bonded
  • Install spark detection and suppression systems
  • Avoid potential ignition sources in hazardous areas

Cleanliness

  • System should have smooth interior surfaces for ease of cleaning
  • Include provision for purging with inert gas if needed
  • Establish procedures for routine cleaning and maintenance

Material Handling

  • Select equipment compatible with powder flow properties
  • Consider vibratory feeders, rotary valves, vacuum transport
  • Ensure optimal powder flow with no rat-holing or bridging

Proper installation following supplier recommendations is key for maximizing equipment effectiveness and safety.

Operation of Atomized Metal Powder Systems

Efficient operation of metal powder handling systems requires training personnel on procedures and safe practices. Key aspects include:

  • Wear appropriate PPE – respirators, gloves, safety glasses
  • Avoid powder spills and minimize dust
  • Do not open equipment under load
  • Follow purge sequences before maintenance interventions
  • Conduct periodic inspections and leak checks
  • Maintain optimal flow and pre-set pressures/vacuums
  • Monitor oxygen and moisture levels if needed
  • Store powder samples safely for quality checks
  • Keep detailed logs for processing parameters
  • Adhere to recommended preventive maintenance schedule

Establishing SOPs and checklists will help personnel perform critical tasks consistently and safely. Digital monitoring of critical parameters can also improve reliability.

Maintenance of Atomized Metal Powder Systems

Regular maintenance keeps powder handling systems running reliably over the long term. Key aspects of maintenance program include:

Inspections

  • Check hoses, seals for leaks, cracks periodically
  • Inspect screws, motors, bearings, belts for damage
  • Verify gauges, sensors, detectors are functional

Cleaning

  • Follow schedule for deep cleaning equipment internals
  • Remove powder buildup to prevent flow issues
  • Clean filters to maintain air quality and avoid sparks

Calibration

  • Calibrate flow meters, pressure sensors per schedule
  • Confirm powder feeder settings match rate
  • Check load cells on hoppers ensure accurate level

Replacement

  • Replace worn out hopper liners, screws as needed
  • Overhaul or replace aged feeders and valves
  • Keep spares of common wear items on hand

Documentation

  • Log all maintenance and repairs performed
  • Track equipment operating hours/cycles
  • Update procedures as needed

Effective maintenance keeps powder systems running safely and productively.

Choosing an Atomized Metal Powder Supplier

Selecting a reliable supplier of atomized metal powder is critical for manufacturing operations. Here are key considerations when evaluating suppliers:

Powder Quality

  • Tight control of particle size distribution
  • Consistent spherical morphology
  • Low oxygen/nitrogen levels
  • Stringent quality control standards

Technical Expertise

  • Experience tailored to application
  • Knowledge of atomization process
  • Capability to develop custom alloys

Production Capability

  • Sufficient capacity to meet demand
  • Backup options for supply continuity
  • Scalability to accommodate growth

Testing and Certification

  • Comprehensive analytical testing
  • Detailed certificate of analysis
  • Qualification to industry standards

Customer Service

  • Responsiveness to inquiries
  • Guidance on best product fit
  • Flexibility for custom orders

Evaluation of factors beyond just price enables selection of the supplier best positioned to deliver performance and partnership over the long term.

Pros and Cons of Atomized Metal Powders

Pros

  • High purity with low oxide content
  • Consistent particle size distribution
  • Good flowability due to spherical shape
  • Allows small feature fabrication <100 μm
  • Near net-shape capability to minimize waste
  • Cuts energy use and emissions versus primary metal production
  • Recyclable to recover expensive alloys

Cons

  • Expensive production due to complex processing
  • Limited sizes and volumes available
  • Requires handling systems for containment
  • Powder beds have lower thermal conductivity
  • Safety issues like dust explosions require mitigation
  • Post-processing often needed to achieve properties

Understanding both benefits and limitations helps identify the best opportunities to leverage atomized metal powders.

Future Outlook for Atomized Metal Powders

The market for atomized metal powders is projected to see strong growth as applications like additive manufacturing continue gaining adoption.

Key trends shaping the future include:

  • Development of new specialty alloys using atomization
  • Tighter particle size control and customized distributions
  • Multi-metal powders with compositional gradients
  • Powder recycling systems and services gain traction
  • Increased automation and process monitoring
  • More industry consolidation among suppliers
  • Declining prices as higher volumes are produced
  • Expansion into emerging applications like biomedical

Advances in atomization technology will enable expanding use of metal powders, unlocking new geometries and material performance.

atomized metals

FAQ

Q: What is the difference between atomized and spherical metal powders?

A: Spherical powders refers to the particle shape being close to a perfect sphere. Atomized powders can have spherical as well as irregular morphology depending on the production method. So all atomized powders are not spherical, but spherical powders are produced via atomization.

Q: How are pre-alloyed and master alloy atomized powders different?

A: Pre-alloyed powders are produced from an alloyed melt so the composition is uniform throughout each particle. Master alloy powders contain high percentages of alloying elements which get blended with base powders to achieve the final chemistry.

Q: What safety measures are required when handling atomized metal powders?

A: Key precautions when handling atomized powders include adequate PPE, minimizing dust, proper grounding, ignition source control, inert purging, and explosion prevention systems. Appropriate training of personnel is critical.

Q: How does grain size in atomized powders compare to conventional alloys?

A: Because of the rapid solidification, atomized powders have much finer grain sizes than conventional alloys, typically a few microns or less. This leads to different properties.

Q: What is the shelf life of common atomized metal powders?

A: If stored properly in sealed containers under controlled humidity, most atomized powders last 12-24 months before significant oxidation occurs. Moisture sensitive powders have shorter 6-12 month shelf life.

Q: What is the typical size range of particles in atomized powders?

A: Atomized powders span a wide size range from 1 micron to 1000 microns. But the major fraction used for manufacturing is typically 10-150 microns for good flow and packing characteristics.

Q: How are atomized metal powders recycled?

A: Atomized scrap and powders are remelted under controlled atmosphere to avoid oxidation. The recovered alloy is then reused to produce new powder feedstock. Some processes allow direct powder reuse.

Q: What is the benefit of inert gas atomized versus air atomized powders?

A: Inert gas atomization using argon or nitrogen allows lower oxygen pickup. This improves powder reactivity and leads to higher performance, making it preferred for reactive materials like titanium alloys.

Q: How do you determine if a powder is air atomized versus water atomized?

A: Air atomized powders have spherical morphology with smooth surface while water atomized particles are more irregular in shape with rougher surface texture. Also, water atomized powders tend to have higher oxygen content.

know more 3D printing processes

Share On

Facebook
Twitter
LinkedIn
WhatsApp
Email

Metal3DP Technology Co., LTD is a leading provider of additive manufacturing solutions headquartered in Qingdao, China. Our company specializes in 3D printing equipment and high-performance metal powders for industrial applications.

Inquiry to get best price and customized Solution for your business!

Related Articles

D2 Spherical Tool Steel Alloy Powder:Exceptional Toughness for Harsh Conditions

When it comes to high-performance tool steels, D2 Spherical Tool Steel Alloy Powder is a name that stands out. Known for its exceptional wear resistance, high hardness, and impressive toughness, D2 is a versatile material widely used across industries, from tooling to additive manufacturing. Its spherical morphology, achieved through advanced atomization techniques, ensures excellent flowability, consistent packing density, and superior performance in modern manufacturing methods like 3D printing and metal injection molding (MIM).

What makes D2 alloy powder special? It’s a high-carbon, high-chromium tool steel that delivers outstanding durability and edge retention. Whether you’re crafting precision parts, high-wear mechanical components, or cutting tools, D2 is the dependable choice that doesn’t compromise on quality. This guide dives deep into the composition, properties, applications, and benefits of D2 Spherical Tool Steel Alloy Powder, giving you all the insights you need to make an informed decision.

Read More >

FeNi80 Soft Magnetic Alloy Spherical Powder: Built for Maximum Efficiency

In the world of advanced materials, FeNi80 Soft Magnetic Alloy Spherical Powder is a standout performer. Renowned for its exceptional magnetic properties, this iron-nickel alloy is a game-changer in industries like electronics, aerospace, and power generation. With an impressive 80% nickel (Ni) and 20% iron (Fe) composition, FeNi80 is designed for high-performance applications that demand superior soft magnetic properties, low coercivity, and high permeability.

In this guide, we’ll take a deep dive into the FeNi80 Soft Magnetic Alloy Spherical Powder, covering its composition, properties, applications, pricing, advantages, and much more. Whether you’re an engineer, researcher, or manufacturer, this resource will help you understand why FeNi80 Powder is the preferred choice for cutting-edge magnetic applications.

Read More >

Get Metal3DP's
Product Brochure

Get The Latest Technology, Innovations And Company’s News Delivered.